R50 – R65 Rail Scrap Supplier for Bulk B2B Buyers
Product Specifications:
The chemical composition is the standard for R50 & R65 rails, original weight 50 pounds per yard or heavier, 6 meters long and over. Material to be suitable for re-rolling into bars and shapes. Free from bent and twisted Rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of a piece of rail. Free from fluff, non-ferrous inclusions excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances and coatings any organic waste, any other harmful substances. Dirt, dust, rust, fluff and other impurities not allowed over 5%.
ISRI-CODES:
(27) Rail, steel No.1 – Standard section T rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail.
(28a) Rail, steel No.2 – Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 18 inches long and under.
(28b) Rail, steel No.2 – Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 2 feet long and under.
(28c) Rail, steel No.2 – Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 3 feet long and under.
(29) Rail, steel No.3 – Standard section T, girder and/or guard rails, to be free from frog and switch rails not cut apart and contain no manganese, casts, welds or attachments of any kind except angle bars. Free from concrete, dirt and foreign material of any kind.
Nominal Chemical Composition
Carbon (C) 0.20% to 0.60%
Manganese (Mn) 0.60% to 0.90%
Silicon (Si)0.15% to 0.35%
Sulphur (S) 0.05% to Maximum
Phosphorous (P) 0.05% to Maximum
Arsenic (Ar) 0.15% to Maximum
Nominal Specification for R50 – 51.67 kg/m GOST 7173-75
Carbon (C) 0.40% to 0.58%
Manganese (Mn) 0.75% to 0.88%
Silicon (Si) 0.13% to 0.28%
Sulphur (S) 0.045% to Maximum
Phosphorous (P) 0.035% to Maximum
Arsenic (Ar) 0.13% to Maximum
Nominal Specification for R65 – 64.72 kg/m GOST 8165-75
Carbon (C) 0.40% to 0.58%
Manganese (Mn) 0.75% to 0.88%
Silicon (Si)0.13% to 0.28%
Sulphur (S) 0.045% to Maximum
Phosphorous (P) 0.035% to Maximum
Arsenic (Ar) 0.13% to Maximum
Bulk Used Rail Scrap R50 R65 for Industrial Supply
International Scrap Metals supplies R50 – R65 rail scrap for serious B2B buyers, industrial processors, scrap traders, steel mills, foundries, and recycling operations.
If your business is sourcing used rail scrap R50 R65 in bulk, our team can help you discuss product requirements, grade expectations, quantity, destination, and supply details through a direct and professional inquiry process.
Our approach is built around clear product communication, grade-defined sourcing, global supply access, and transparent buyer verification.
Buy Rail Scrap with confidence
- Bulk rail scrap supply for qualified B2B and industrial buyers
- R50 and R65 rail scrap options discussed by requirement
- Grade-defined supply conversations before quotation
- Global sourcing support for scrap metal procurement
- Transparent buyer verification for serious commercial inquiries
- Decades of combined industry experience in scrap metals
Product Snapshot: R50 and R65 Rail Scrap at a Glance
Use this quick summary to confirm whether our R50 rail scrap and R65 rail scrap supply direction matches your procurement requirement.
Product Detail | Information |
Product Type | R50 – R65 Rail Scrap |
Material Category | Used rail scrap / rail steel scrap |
Common Buyer Type | B2B buyers, steel mills, foundries, recyclers, scrap traders, industrial processors |
Supply Focus | Bulk rail scrap procurement |
Common Applications | Smelting, re-rolling, recycling, steel processing, industrial raw material use |
Buyer Information Needed | Quantity, destination, grade requirement, shipment preference, timeline, company details |
Process Focus | Grade discussion, supply review, buyer verification, quote coordination |
R50 – R65 Rail Scrap Product Options
Industrial buyers may search for R50 and R65 rail scrap in different ways.
R50 Rail Scrap
R50 rail scrap is commonly requested by buyers looking for used rail steel material for recycling, re-rolling, melting, and industrial scrap processing. If your purchasing team requires R50 material specifically, share the quantity, destination, and application details so the supply discussion can be handled clearly.
R65 Rail Scrap
R65 rail scrap is often requested by buyers handling heavier rail steel scrap requirements. International Scrap Metals can review your R65 inquiry based on product requirement, buyer verification, supply expectations, and commercial discussion.
Used Rail Scrap R50 R65
Many buyers source used rail scrap R50 R65 as a bulk ferrous scrap material for steel recycling, smelting, and industrial processing. This option is suitable for buyers who are open to discussing R50 and R65 rail scrap according to grade, availability, quantity, and destination requirements.
Bulk Rail Steel Scrap
Bulk rail steel scrap supply is typically suited for steel mills, foundries, re-rolling operations, recycling companies, and scrap metal trading businesses. For accurate discussion, buyers should provide quantity, delivery location, required material type, and any cutting or sizing expectations.
R50 – R65 Rail Scrap Specifications and Buyer Requirements
Buying R50 – R65 rail scrap requires more than a basic product name.
Serious B2B buyers usually need to discuss grade, quantity, destination, cutting expectations, material condition, and documentation requirements before receiving a meaningful commercial response.
Grade and Material Details
R50 and R65 refer to rail categories commonly requested in the used rail scrap market. Buyers searching for rail R50 R65 usually want rail steel scrap suitable for industrial reuse, recycling, melting, smelting, or re-rolling applications. Before quotation, our team may review:
- Required rail category
- Quantity needed
- Intended application
- Destination country or delivery point
- Cutting or sizing expectations
- Material condition requirements
- Buyer company details
- Procurement timeline
Quantity, Cutting, and Destination Requirements
Bulk scrap buyers often have different handling needs.
Some buyers may require cut rail scrap. Others may want to discuss available lengths, loading preferences, shipping terms, or destination-based requirements.
When submitting your inquiry, include:
Copper Millberry Scrap
Buyers looking for copper millberry scrap can request current availability through International Scrap Metals. Millberry-related inquiries should include quantity needs, destination, and any required product expectations.
- Required metric tonnage
- Preferred grade or grade range
- Destination port or delivery location
- Required timeline
- Cutting or sizing preference
- Company name and buyer details
- End-use or resale purpose
Confirming Specifications Before Quote
For used rail scrap, final supply details should always be confirmed before pricing, shipment discussion, or next-stage documentation. This protects both the buyer and supplier by keeping the inquiry clear, verified, and commercially practical.
Bulk Rail Scrap Supply for Qualified B2B Buyers
International Scrap Metals is focused on serious B2B inquiries for bulk rail scrap.
This product category is not handled like a small retail purchase. Buyers should be ready to share procurement details so the inquiry can be reviewed properly.
What to Include in Your Quote Request
To request a quote, send the most complete requirement possible. Your inquiry should include:
- Product needed: R50, R65, or R50–R65 rail scrap
- Required quantity
- Destination location
- Buyer company name
- Contact person details
- Intended use or resale purpose
- Preferred shipment or delivery terms
- Required timeline
- Cutting or sizing needs, if any
Buyer Verification and Supply Discussion
Because rail scrap procurement involves bulk quantities and commercial coordination, buyer verification is an important part of the process.
International Scrap Metals uses transparent buyer verification to support serious inquiries and protect the quality of business communication.
Grade-Defined Quality and Transparent Sourcing
International Scrap Metals focuses on clear, grade-defined product discussion for scrap metal buyers.
For R50 – R65 rail scrap, this means the conversation should be based on the requested rail category, material expectations, quantity, destination, and buyer requirement.
Clear Product Discussions Before Quotation
A reliable quote starts with a clear requirement.
Before discussing commercial terms, buyers should confirm what they need and how the material will be used.
Our team can discuss:
- R50 rail scrap requirements
- R65 rail scrap requirements
- Mixed used rail scrap R50 R65 inquiries
- Bulk quantity needs
- Destination and logistics expectations
- Industrial use case requirements
Global Sourcing With Buyer-Focused Communication
International Scrap Metals supports global sourcing conversations for scrap metal buyers. The goal is to connect qualified buyers with clear product discussions, not to create confusion through vague promises or unsupported claims. Our process is direct, professional, and built around buyer clarity.
Why Choose International Scrap Metals for R50 – R65 Rail Scrap?
Choosing a supplier for R50 – R65 rail scrap is not only about finding a product listing.
Industrial buyers need clear communication, product understanding, bulk supply coordination, and a practical quote process.
International Scrap Metals brings decades of combined industry experience in scrap metals and a direct approach to B2B supply conversations.
Decades of Combined Scrap Metals Experience
Our team brings decades of combined industry experience in scrap metals. That experience supports practical buyer discussions around material type, bulk requirements, sourcing expectations, and quote readiness.
Built for Serious Industrial Buyers
International Scrap Metals works with B2B buyers, industries, scrap traders, recyclers, and processing operations. The page is built for buyers who already know they need rail scrap and want a supplier conversation that respects their time.
Direct, Professional Quote Handling
Our quote process is structured around clarity. We review the buyer’s product requirement, quantity, destination, and company details before moving into deeper commercial discussion. This helps create a better experience for serious buyers and reduces wasted back-and-forth.
How the Quote and Buyer Verification Process Works
The process is designed to be straightforward.
You submit your requirement, our team reviews the details, and the discussion moves forward based on product fit, buyer verification, and supply availability.
Step 1: Submit Your Product Requirement
Start by sending the product details you need. Include whether you are looking for R50 rail scrap, R65 rail scrap, or mixed R50 – R65 rail scrap supply. Also include your required quantity, destination, and timeline.
Confirm Grade, Quantity, and Destination
After receiving your inquiry, International Scrap Metals reviews the basic requirement. This stage helps confirm whether the request is clear enough for a meaningful supply and quote discussion.
Discuss Availability and Commercial Terms
Once the buyer details and product requirement are clear, the conversation can move toward availability, commercial terms, and next procurement steps where appropriate.
Frequently Asked Questions
What is R50 – R65 rail scrap?
R50 – R65 rail scrap refers to used rail steel scrap commonly requested by industrial buyers, recyclers, steel mills, foundries, and scrap metal traders.
It is typically sourced for recycling, smelting, re-rolling, and other heavy industrial steel processing applications.
Do you supply used rail scrap R50 R65 in bulk?
International Scrap Metals handles inquiries for used rail scrap R50 R65 for qualified B2B buyers.
Buyers should submit quantity, destination, grade requirement, and company details so the inquiry can be reviewed properly.
Who typically buys R50 and R65 rail scrap?
Typical buyers include steel mills, foundries, smelting facilities, re-rolling operations, scrap traders, recyclers, import buyers, export buyers, and industrial processors.
These buyers usually need bulk supply and clear product discussion before quotation.
Can buyers request R50 rail scrap and R65 rail scrap separately?
Yes, buyers can submit inquiries for R50 rail scrap, R65 rail scrap, or a combined R50–R65 requirement.
The final discussion depends on the buyer’s quantity, destination, grade needs, and supply availability.
What information is needed to request a quote?
To request a quote, provide your required product, quantity, destination, buyer company details, shipment preference, timeline, and any cutting or sizing expectations.
Complete inquiries are easier to review and respond to.
Is HMS R65 the same as R65 rail scrap?
Not always.
Buyers searching for HMS R65 should confirm whether they need heavy melting scrap, R65 rail scrap, or another ferrous scrap category.
International Scrap Metals can review the inquiry details and help clarify the product requirement before quote discussion.
Does International Scrap Metals verify buyers before quoting?
Yes, buyer verification is part of the professional inquiry process.
This helps ensure that commercial discussions are handled with serious B2B buyers who can provide clear requirements.
How do I request pricing for bulk rail scrap?
Send your product requirement to International Scrap Metals with quantity, destination, grade preference, and buyer details.
Our team will review the inquiry and guide the next discussion based on product fit and buyer verification.
Request a Quote for R50 – R65 Rail Scrap
If your company is ready to source R50 – R65 rail scrap, International Scrap Metals can review your bulk requirement and help you start a clear supply discussion.
Send your product details, quantity, destination, and buyer information so our team can understand your requirement and respond appropriately.
For serious B2B buyers, a clear inquiry is the fastest way to begin a professional quote conversation.